Land Rover Shire Blue LRC392

SKU: 5011
From

£16.25Excl. VAT

£19.50Inc. VAT

Authenticated shade from original panels

Clear
*

Description

Land Rover Shire Blue LRC392. Traditionally a classic colour used on the 90 and 110’s roughly between 1988 1990. Prior to the launch of Defender

Type of Paint

Paintman Paint take pride in only producing the highest quality, hand-mixed paints. Combining premium tints and resin in our formulas develops a paint with outstanding coverage, build and durability; suitable for the finest of projects.

Our mission is to provide paint that is as close to the original shades as possible.

We are now able to exclusively offer a choice of Enamel to meet your growing requirements:

  • Traditional Synthetic Coach Enamel– Maintaining the traditional element of a long wet edge time minimises brush marks whilst maximising its self-levelling ability for a perfectly flat, gloss finish. Our premium formula gives you superb coverage; suitable for the traditional application methods of brushing and rollering. Synthetic Coach Enamel also supports spray application for those who want product originality.
  • Quick Dry Enamel (Spray Only) – A speedy Enamel perfect for those who require a quick turnaround. A 20 minute Flash Off time will allow for a quick turnaround. Paintman’s fast drying formula creates an excellent high build, high-gloss coverage for a range of first-class projects.

Additional information of interest

  • Primer & Undercoat. We recommend using the closest colour primer & undercoat to your top coat. For Land Rover Shire Blue LRC392 use light grey primer and blue undercoat.
  • Spray application. All of our Enamels will need to be diluted by around 5-10% using Paintman Coach Enamel Thinners, thus ensuring the highest quality finish and maintaining correct drying times.
  • Surface Preparation. Prior to painting ensure all surfaces are clean and dry to remove any contaminants. We recommend using our Surface cleaner 2800 for painted surfaces or our Surface Cleaner 2802 for bare metal. Surfaces should be keyed at each layer to maintain adhesion. Just prior to painting, wipe the surface with a Tack Rag to remove dust and other loose contaminants.
  • Aerosols. Aerosols in all colour variants are available, however if the option is not listed, please contact us for further information.  Special order aerosols are subject to a minimum order quantity of 4.
  • Painting tips and advice. Check out our methods of use page, FAQ’s or YouTube Channel for lots of hints and tips. Alternatively, ask us your question on our Contact page.

Coverage

Based on completing minimum of 2 coats the below methods of painting and the rough expected square metre coverage you can expect

Brushing/Rollering: 8 sqm per 1 Litre
Spraying: 10 sqm per 1 Litre
Aerosol: 2 sqm per 400ml Can

Drying Times

  • Traditional Synthetic Coach Enamel
    • Touch Dry 3hrs @20°C
    • Hard Dry 12hrs @20°C
    • Full Dry 24hrs @20°C
    • Recoatability After 24hrs
  • Quick drying Enamel – Spray Only
    • Touch Dry 2hrs @20°C
    • Hard Dry 8hrs @20°C
    • Flash Off time 20mins
    • Recoatability Min 24hrs depending on build & temp. Surface should be denibbed prior to overcoating.

Paint Type

We are now able to exclusively offer a choice of Enamel paint to meet your application method requirements

  • Traditional Synthetic Coach Enamel – Our traditional coach enamel formula gives you superb coverage and is ideal for brushing and rollering,  It has an extra long wet edge time to allow for self levelling, using alongside side thinners can furthur aid with flow (5-10% ratio) Coach Enamel can also be sprayed.
    • Touch dry 3hrs @20°C
    • Hard Dry 12hrs @20°C
    • Full Dry 24hrs @20°C
  • Quick drying Enamel – Spray Only – A quick drying formula ideally suited when using spraying equipment with a flash of time of 20 minutes. Ensure good airflow to aid drying. Requires 5-10% Thinners Ratio
    • Touch dry 2hrs @20°C
    • Hard Dry 4hrs @20°C
    • Full Dry 12hrs @20°C